Used upper bracket from cr-10 simple frame brace by Junaling. Had rods left over from another project. designed rod ends and designed an adjustable lower brace. Lower brace design allows for adjustment of the rod length.

added rod end that will fit 6.5mm rod or 1/4" rod. fiberglass driveway marker or all thread should work.

Creality

CR-10

No

.2

75%

my tubes (rods) were 9.7 mm diameter and 560 mm long(22"). 5m cap screws (and hammer nuts. Had 20 mm screws, but had to use a nut as a spacer. mount to rod end screws are 5 mm x 25 mm.