I have short hair, but I enjoy the Native-brand shampoo and conditioner you can get at Target. However, the pump puts out WAY too much in one go. This print limits it with a simple reusable snap-on clip!

This size limits the pump to about ½ pump, which seems right for my shorter men's haircut. If there's interest, I could upload other options e.g. for a ¾ pump—let me know if there’s something that would be useful to you.

I printed mine on Inland PLA+, but it should be pretty versatile. It's tight enough to stay on, but forgiving enough to easily pop off and reuse on a new bottle. My print cost about 2¢ and took around 10 minutes to print—and I figure it will nearly double the lifetime of each shampoo and conditioner bottle it's used on, so it’s worth it!

Print Settings

• 0.2mm layer height
• 0.4mm first-layer height for adhesion
• 10% infill, cubic
• 0.8mm walls; 2× wall line count
• No supports
• No brim or raft