Ender 3 Cable chains This is a remix of johnnieWhiskey's original cable chain for the Creality Ender 3. I have compiled it into a single STL file for easier printing. PRINT CE3_cableChain_AllParts.stl ONLY! USE OTHER PARTS AS SPARES/REPLACEMENTS. the CE3_cableChain_AllParts.stl contains: 25x cableChain_link_v3.stl ** refer to update at the bottom 25x cableChain_linkCover_v2.stl 1x cableChain_40MountTop_v2.stl 1x cableChain_XendCover.stl 1x cableChain_40MountSide_v2.stl 1x cableChain_bedCorner_v2.stl 1x cableChain_bedCornerCover_v2.stl 1x cableChain_plateMount_v2.stl Please note: The main STL is aligned for the best printing outcome, and it all fits on the bed of the Ender 3. with the Settings I have detailed, it takes 10hrs and 25mins to print. You only need : 1x cableChain_bedCorner_v2.stl and 1x cableChain_bedCornerCover_v2.stl or 1x cableChain_plateMount_v2.stl not all of them. Should you need any extra length on the cable chains, just print extras of the cableChain_link_v3.stl and cableChain_linkCover_v2.stl UPDATE-17/02/2019: I have just realised that it only contains 24 links, so make sure to print one extra Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.15mm Infill: 20% Filament brand: creality Filament material: PLA Notes: Temperature: 200C Bed Temperature: 60C Speed: 60mm/s Skirt: Yes Skirt Line Count: 2 Skirt Distance: 1mm