Keep your desk organized with this simple holder, with an easily accessible USB flash drive or SD card adapter.

I looked around for a bunch of different USB/SD holders, but could not find one that had exactly what I wanted, so I made my own.

Specifications

The holder has slots for:

• 4 USB-A
• 1 USB-C
• 5 SD
• 5 MicroSD
• 2 SD cases

There is also a small tray to hold other miscellaneous items, such as the lids of drives.

The spacing between each USB-A slot is 7mm, so the holder can fit most standard-size drives.

I have found that some larger SD cases may not fit, so you might find the same thing.

Also, the USB-C slot is slightly loose, but not nearly enough that you will have to worry about a drive falling out.

Print Settings

Print without supports and if desired, with a brim. The infill percentage and layer height don't really matter.

Other

If you found this model useful, please give it a like, as it really helps me out.

Thingiverse Link: https://www.thingiverse.com/thing:6902500