This is a case for Caddx Peanut. Ispired by original case for insta360 GO2.

Download All Files

Assembling

1. IMPORTANT! Check the polarity of the magnets. Push the magnets into the holes.
   Before gluing the shell to the cartridge, double-check that the magnet pulls the camera in.
2. Insert the pins into the hinge and the inserts. Cut the rod if it protrudes beyond the insert.
3. Use a few drops of glue to glue the shells with the inserts.

You will need:

• 2x 2mm x 25mm rods - steel or carbon also you can use screw without head
• 1x neodymium magnet e.g:
  • Cylinder 8 x 1-3mm max
  • or Cylinder 10 x 1-3mm max
  • or Square 7 x 10 x 1-3mm max
• 2x neodymium magnet 4 x 4-8mm
• a few drops of CA Glue

No

Yes

0,2

20