Designed for the following parts

• 5010 blower fan
• Phaetus Dragon HF
• 40mm Noctua fan
• BL touch clone

Should be compatible with the following parts

• Standard Phaetus Dragon
• Any 40mm radial fan
• Genuine BLtouch

Hotend and 40mm fan are mounted using their included screws, everything else is mounted with m3 hardware and brass inserts, except the screw that secures the assembly to the x carriage, this goes into a captive nut. Inside the assembly is also a 58mm piece of ptfe tubing.

To attach the bowden tube, a sliding t-slot nut is inserted between the two halves, and a pc4-m6 fitting is screwed into it. This is what I used because it is the hardware I had on hand.