I made a cockpit mount for an all in one FPV camera (GOQOTOMO GD02 on Amazon) for the Eachine p40 RC plane. You'll need to cut off the old foam cockpit and screw the board into the bottom of this printed one. You can power the camera from any 1 cell 3.8V lipo battery or soldering the wires of the battery to the power leads on the board. I also included a cockpit without bars for weight savings (barely 2 grams, so ehh not much).

If you want to hold the cockpit in better, you can use the magnet stl and two 8x3mm circular magnets. Glue to magnet piece into the inside of the plane.

Category: R/C Vehicles