A wall mount for the IKEA STÄNKREGN STÄNKREGN LED-ringlampe, kan dæmpes/turkis - IKEA, due to the lights light weight the wall mount is based around double-sided tape. 

The ball-joint is created by @DieZopfe_245259, link to the file is found here: Open Source Universal Ball Joint (to reuse!) by DieZopfe | Download free STL model | Printables.com

The STÄNKREGN light has 3 colours and adjustable light, the pictures of the model has a side-by-side comparison between the different colours and the light turned off in a “low lighted room”.

3d print in the picatures in printed in Prusament PLA on a stock Prusa mini plus printer. The “base for the ball" and the “ring” was printed without supports, the “ball” / "light holder" part" was printed with organic supports with the “ball” touching the heated bed standing upright with the “hole” for the STÄNKREGN facing upwards.

Everything was sliced with PrusaSlicer.

The STÄNKREGN light comes with a base for holding the light on a laptop screen, if light is conected to the provided base it might be difficult to remove, on the 3d printed mount the light is held by friction. 

The idea was born from I@horcicaa_84044 model: IKEA STÄNKREGN 90° Tripod Mount by horcicaa | Download free STL model | Printables.com however this 3d model is not used in the provided 3d files.

BR 

S