Simple 3" Floppy Disk Drive Caddy. Please note this is for the 3" drive widely used in early Amstrad built machines (CPC, PCW, Spectrum +3) not 3.5" drives.

I've replaced a few of my 3" drives with Goteks and wanted to use them with a Greasweazle USB interface to archive my disks (https://github.com/keirf/Greaseweazle). Instead of having the bare drive I designed this simple sleeve to help protect the drive and minimise dust etc...

4 screw holes in the side to secure, hole at the back for the connectors & inserts on the bottom for some rubber feet.

Could be used as an external drive with the right cables (and power).

*Added 5mm to the height as first upload was too short

Anycubic

All-metal Mega

No

No

0.3

25