Summary

This is a battery case for a Philips DCC 130 and equivalent DCC players.

Materials used:

https://www.aliexpress.com/item/32881285245.html?spm=a2g0s.9042311.0.0.27424c4dzVV37O

https://www.aliexpress.com/item/32845586449.html?spm=a2g0s.9042311.0.0.27424c4dzVV37O

https://www.aliexpress.com/item/32965402874.html?spm=a2g0s.9042311.0.0.27424c4dzVV37O

some small wire
super glue

You can fit the small pcb in the hole in the bottom front of the print. Put the cover on top if needed

Use: Put the bracket in the player and place 18650 cell in it. Then place it in your player. If the cell is empty, remove the bracket from the player, remove the battery and charge in a 18650 charger.

Update:

I made a v4 version: functionality is the same, but it has different contacts to the DCC player. These are more easy to glue in the case and look nicer.

You will need these parts, one of them is different from the older version:

https://www.aliexpress.com/item/32881285245.html?spm=a2g0s.9042311.0.0.27424c4dzVV37O

https://www.aliexpress.com/item/32845586449.html?spm=a2g0s.9042311.0.0.27424c4dzVV37O

https://nl.aliexpress.com/item/33040661593.html?spm=a2g0s.9042311.0.0.27424c4d9TJwJu