Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 3.7
PLA BambuLab Matte Marine Blue Transmission Distance: 7.3
PLA BambuLab Basic Orange Transmission Distance: 6.7
PETG GEETECH Gray Transmission Distance: 5.6
PLA BambuLab Basic Yellow Transmission Distance: 7.8
PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #8 (0.72mm) swap to Marine Blue
At layer #11 (0.96mm) swap to Orange
At layer #15 (1.28mm) swap to Gray
At layer #18 (1.52mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.