This is a simple print to keep pots of paint organized. I originally just had paint pots in a box but it wasn't very space effective with everything just in a pile at the bottom of the box so I made this.

The print is designed for Citadel Colors paint pot widths, heigh doesn't matter. You have print several of these, put paints in them and then stack the holders on top of each other to have a more easy to handle stack of paints.

I've included both 2x4 and a 4x4 models. I found that you have to position the pots a bit more careful with a 4x4 due to the plastic flap on the back of the bottles, but it makes a very good bottom layer of your paint storage stack.

Print Settings

Printer Brand:

LulzBot

Printer: 

TAZ 6

Rafts:

Doesn't Matter

Supports: 

Doesn't Matter

Resolution:

0.5

Notes:

I've printed these successfully using both 0.5 and 0.25, both work but depending on how tight you want the holder to grip the pots (or not) you might need to sand down eventual bumps on the inside or print at 99% or 101% size.

Category: Organization