This is a lockable accessory drawer for Rivian vehicles.  For it to locking portion to work, you need a PCB, it fits in without the PCB, but it won't lock

For printing, I recommend PETG as it withstands the summer heat, PLA does not. The rear can be printed rear side down, and it only needs supports over the PCB screw holes. The Front can be printed font down and needs no supports. If you can, print the Font-Long.stl and Rear.stl, if Front-Long.stl is too big for your printer you can print Front-Short.stl and Mid.stl. I use SCIGRIP 16 glue, and just push the pieces together with glue. The Rear-Cover needs supports, the Top Cover needs no supports, though it's somewhat simple at this time.

The PCB screws into the back with 4x M2x5mm wood screws, the Rear Cover fits screws on with 6x M2x6 wood screws.

To obtain a PCB, you can either ask me, I have a bunch for $10 shipped if you are in the US. If you are not in the US, or want to make them yourself, you can just upload the gerber zip file to jlcpcb.com (or whoever is your prefered PCB vendor), they'll make the PCB for $2 with tin contacts or $19 with gold. Select ENIG to get gold plated contacts. The resistor needs to be purchased elsewhere, the part number on the BOM is the digikey PN.