This is a solar panel mount for the "Switchdoc.com" 6V 330ma solar panels. It can hold three panels.

It was designed using "FreeCad" (Thank you FreeCad!)

It is designed to mount on a weather proof box.

The screws used to hold the panels into the mount are 8-32 X 2 inch. They are a tight fit when installing them. Use a screw driver to coax them into the hole.

Be sure to place the screws into the mounts with the head of the screw at the top of the mount so that you can attach the "tilt braces" at the bottom of the mount.

There are two sets of tilt braces. One is designed to just prop the panel at around a 45 degree angle. After thinking about the possibility of wind getting under the panel and lifting it. I designed a second set that includes devices to secure the tilt braces to the box. Use the one that works best for you.

Printrbot

Printrbot Simple Metal

No

No

.3

yes

This is printed on the Printrbot simple Pro