MYNT 3D Station
d0rothy
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-03-18 21:01:24
0
0
000Beschreibung
Tags
Modellquelle
Rezensionen(0)
This is a station for the MYNT3D Printing Pen Pro.
In addition to the 3D printed parts you will need:
- MYNT3D Professional Printing 3D Pen with OLED Display
- Overture 200mm x 200mm Adhesive Backed Build Surface. These are often included for free with Overture Filaments, but if you need more they can also be purchased as a five pack separately.
- Two Rubber Grommets - 3/8" Inside Diameter, 1/2" Panel Hole Diameter, 1/4" Panel Thickness
- Five M4 x 35mm Stainless Steel Button Head Hex Screws
- Three M4 x 25mm Stainless Steel Button Head Hex Screws
- Eight M4 Stainless Steel Nuts
Finally, you will need to laser cut a 1/4" aluminum panel using theMynt 3D Station - Base.step file. If you do not have a laser cutter capable of cutting this, you can have it cut by a service like OSH Cut. Codes for a considerable discount off your first order can be found online.
Mynt 3D Station.step andMynt 3D Station.f3d are included in case you would like to make modifications to the design. Please post any iterations as a remix/make of this original design.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
20%
Filament: Hatchbox PLA Black
Notes:
Mynt 3D Station - Pen Rest.stl
* Quantity: 1x * Orientation: bottom face on print bed * Infill: 20% * Top/Bottom Layers: 4 * Walls: 3 * Supports: NoneMynt 3D Station - Foot - Back.stl
- Quantity: 1x
- Orientation: top face on print bed
- Infill: 20%
- Top/Bottom Layers: 4
- Walls: 3
- Supports: If your printer struggles with bridging, supports may be required. Otherwise, none.
Mynt 3D Station - Foot - Print 3X.stl
- Quantity: 3x
- Orientation: top face on print bed
- Infill: 20%
- Top/Bottom Layers: 4
- Walls: 3
- Supports: None
Mynt 3D Station - Filament Holder.stl
- Quantity: 1x
- Orientation: front face on print bed
- Infill: 20%
- Top/Bottom Layers: 4
- Walls: 3
- Supports: None
Mynt 3D Station - Filament Roller.stll
- Quantity: 1x
- Orientation: widest end of roller on print bed
- Infill: 20%
- Top/Bottom Layers: 4
- Walls: 3
- Supports: None
NOTE: If bed adhesion is an issue for you, consider printing these parts with a brim or using an adhesive such as Magigoo.
Tags
Modellquelle
Original-Link: Details anzeigen
CC-BY