A wall mount for the Raspberry PI HQ Camera.  I am using this for my 3D printer's enclosure but it can be mounted anywhere else.

Part list

• 4x 2.5 mm screws to attached the camera to the mount
• 2x 3-3.5mm counter sunk screws to attached wall mount to the desired surface
• 5mm screw that is at least 30mm long
• 4x Stand-offs-4x.stl
• 1x Camera-Mount-1x.stl
• 1x  Horizontal-Swivel-1x.stl
• 1x Wall-mount-1x.stl

Printing instructions

• No supports
• 30% infill
• PLA is good enough