This tool holder can be hung into the extrusion either on the left or right side of the printer. There are two separate base versions for the side.

Things you can get organized with the “base” version:

• The 6 XL Prusa Allan/Torque wrenches
• The XL Prusa Torque driver
• 5 Nozzles in plastic
• 10 Nozzles without plastic and / or screw drivers
• The XL head calibration tool
• The XL head changer calibration tool
• 2 Wrenches
• Nozzle needles
• Nozzle cleaning brush
• Scissoirs or tool for filament cutting
• Tongs

Additionally you can plug in an one of the several “extensions” to add further tool slots for:

• The XL Nozzle replacement tool
• Caliper
• XL Head change greasing tool and the grease tube
• An additional tongs or filament cutter (thicker versions (>7mm thickness), normal (6mm))
• 2 tweezers

Note: 

• To get the right side extension - please mirror the parts in the slicer!
• As you can move the tool holder in the extrusion, you can vary the amount of space it stands out to give you room for more tools / or not, whereas the tonges at the front can stand out in front of the printer for easier access.
• The tool holder will work with or without an enclosure. On the pictures you can see the use of the EnXlosure - where the 3 rear tool openings might be less effective, but are still of some use.

If you have more tools you need to get in: Let me know and I can see how to add them into the mix!

Happy printing!