Print Settings

• Material: PLA, PETG 
  • I printed this with both PLA and PETG and they both worked. I found PETG works best for the Springs but the PLA has a better texture for gripping. 
• Nozzle: 0.4 mm 
• Layer height: 0.15 - 0.20mm
• Infill Density: I used 20% 
• Infill Pattern: Gyroid
• Supports: No
• Build Plate Adhesion: None

What to print

• 4 JoystickSprings.stl
• 1 JoystickShaft.stl
• 1 JoystickTop.stl
• 1 JoystickBottom.stl