Microswiss extruder mount plate for Prusa MINI

Print settings:

• Layer height: 0.2mm
• Perimeters: 4
• Solid layers: 5
• Infill: Gyroid or Grid (25%)
• Material: PETG

Things you need:

• Zip tie
• M3x36 screws (for mounting the stepper motor to the plate (2 pcs))
• M3x4 screws (original are too long for mounting the extruder directly to the motor (3 pcs))

Firmware settings:

Steps: 140

Direction: Wrong

Used knob is slightly modified version of “extruder knob” by Pixel2