Summary
Skidmark X is the fastest pocket sized quad you can find. It uses the 1306 4000kV red bottom motors and small Piko BLX Flight controller. We recommend the Banggood 1000TVL CCD camera and a small VTX and RX like the XSR or Furious FrSky RX and the Cicada BLHeli S ESC's (no more than 12mm wide). Use 4 blade Gemfan 3035 fiber reinforced props. Battery 3S LiHV 500mah Turnigy bolt or 4S Joos 460mah. Build video and flight video coming soon.
Note that this is not for beginners, it has a fixed camera angle for racing. Its aerodynamics are very slippery, this thing just wants to keep moving fast !
More info available at Jellybean FPV (please join)
https://www.facebook.com/groups/720769801395884/
Print Settings
Printer Brand:
RepRap
Printer:
Mendel
Rafts:
Yes
Supports:
Doesn't Matter
Resolution:
0.2 mm layer height
Infill:
20% honeycomb fill with 3 solid layers all round
Notes:
Print in ABS for 3S and Nylon for 4S. Alternatively see the Jellybean X for 4S (coming soon). It is a little smaller and stronger than this model but uses the same hardware.
Post-Printing
Acetone vapour bath is a must if you are using ABS
Modellquelle
