Design

Porcupine is a modular belt attached shotshell holster intended for Five Stand, but can be adapted for other clay shooting disciplines. It is best utilized for shooting sports where there is not very much dynamic movement. May also not be suitable for hunting as gravity keeps the shells in place and moving through brush may knock the shells out. Has not been tested on long treks so your mileage may vary.

The design is parametric to allow for customization of shell gauge, amount of shells held, and width of strap or belt it is attached to.

Example .STLs included are for 2 and 5 12ga shells

Parameters

ShellDia is the diameter of shell. Tested with 12ga shells. Shell measurements are taken from SAAMI standards.

PatNum is the number of slots on the module. 10 is the max.

StrapWidth is width of belt or strap being used. 15mm minimun and 40mm max.