Simple mounts so the BIGTECHTREE ADXL345 can be mounted to any bed or stepper.

The holes for the stepper mount are 31mm apart.

The bed mount can be attached using bed clips and I recommend scaling it along the x-axis in your slicer to fit your bed/clip configuration. 

For mounting you will need some M3 screws and nuts.

I used 2 M3x6 screws with nuts for the bed mount

I used 2 M3x30 and 2 M3x8 screws with nuts for the stepper mount.

I am using a Creality Sprite Extruder SE in my setup which uses the same mounting holes as a stepper.