INFO

The model is based on this holder:

Usually the holder is sold with the bidet as a set, but I only want the holder. So, I decided to print a replacement to lower the cost and to challenge myself with 3D modeling and gain more experience.

INSTALL

I used M4.7x60 mm screw to fix it on the wall. Also, you might want to lightly sand it just to make it more smoother and fit nicely.

NOTE

I added a new version without the screw and can be fixed using a double sided tape. Also added STEP files for anyone who wishes to edit/remix.

PRINT

• material: PETG
• layer height: 0.2 mm
• Parameters: 3 
• Infill: 5-10%
• color: make sure its Orange! 🍊