The Model is 200x200mm in size. X and Y can be adjusted but Z must remain the same.

 You may print at higher layer heights below the Min Depth of 0.48mm

 Actual Depth is 2.3mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.3

PLA BambuLab Basic Blue Gray Transmission Distance: 2.5

PLA BambuLab Basic Gray Transmission Distance: 3

PLA BambuLab Basic White Transmission Distance: 6

This print uses 4 unique filaments. Substitue as you see fit.

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Gray

At layer #14 (1.2mm) swap to Gray

At layer #21 (1.76mm) swap to White for the rest.