She is voluptuous. 

This vase was designed for those that like tactile objects. One cool thing about its geometry is how the light shines on from the edges of the spheres. If you want to enjoy that feature, I suggest printing on a semitranslucent filament, such as PETGs. 

Print Instructions 

The print is relatively simple. Although it was designed with vase mode, I don't see why you can slice this usually with perimeters/walls. In vase mode, you get a cool (negative) texture inside that is sharp.

For rigidity and heft, I will recommend printing with the following settings:

Nozzle size: 0.4mm
Line height: 0.2mm or less
Line width (extrusion width): 0.8mm
Material: PLA or PETG

The vase is scalable. I have tried it at 100% and 50% the size. The full size is a long 6hr print but well worth the wait.

The vase can be printed with a bigger nozzle; be mindful of the entire geometry when you slice it; look for any errors and problems before sending it to print.

Misc

The photos show the vase in two gorgeous Prusament PETG filaments: Neon Green & Ultramarine.