Since doing rideshare part-time takes FOREVER to get a nice driver plate from either one of these companies I decided to make some that are much better than the stickers they issue.

These are designed to work with suction cups with a 10mm threaded screw mount or you can fit them the cups without as long as they have the correct size stem. The holes are 10.5mm. 

Suction cups I went from can be found here https://www.amazon.com/dp/B0BWM24F3G?ref=ppx_yo2ov_dt_b_product_details&th=1

I used generic PLA for everything but the “pink” color for Lyft. Its actually Overture Matte red PLA and looks very pink to my eyes after it prints.

Use glue or a 3mm brin to prevent corner lift.

Print one or both and please rate and comment with pictures!

If printing with PLA dont leave these in the window of your vehicle in hot weather or direct sunlight without the AC cranked as they may warp.