About

I had two Bachmann CONI powerstrips lying around whose mounts were broken. I also didn't wanted to mount them flush inside the desk, so I designed these mounts which replace the original sidecaps. The L-Clamp takes an M4 Nut and gets fastened by an M4 Screw through the replacement sidecaps.

BOM

• 2x M4 Nut
• 2x M4 Button Head Screw (length depends on your tabletop thickness, i used M4x30mm for my 25mm tabletop)

Printing

The Cover_Mount file has to get printed 1x normal, 1x mirrored.

Everything has been printed in Prusament PETG Galaxy Black. I've printed the Cover_Mount with 3 perimeters and 20% infill. The clamp was printed with 3 perimeters and 100% infill.