Remix to create a 3D Printable inside window mount for the Wyze V3 Camera.

Currently designed as a two piece unit with the Window Mount and a back piece that snaps on to secure it in the mount.

The original Wyze product requires you to remove the base or to retract it to "hook" the front lip of the camera. This printable version does not require either of these.

There are three files posted:

• The back snap on piece to secure the camera (Supports required)
• 0 Degree - Flush to window - solid mount (this likely requires no supports if you can handle the bridging)
• 0 Degree - Flush to window - open side mount (this requires supports)

Photos are posted of the open side mount. They're a little rough because I printed this FAST and without supports, but it works and fits great.

Current To Do List:

• Revise attachment to camera by adding tabs to the back of the housing. This will eliminate the need for the back cover, allow for 1 piece printing, and no supports unless open sided.
• Develop method to angle camera. TBD

I would recommend 3M Command Strips for mounting. The Wyze version comes with what are suggested to be permanent adhesive strips.

If you use this and would like to support my efforts, buy me a coffee:

or

https://www.buymeacoffee.com/holocronology

Creality

Ender 3 Pro

No

Yes

10