Well this is a largely unfinished thing, Beware that this is a V1 with little to no tweaking. I had to modify quite a bit of things by hand to get it to fit right. I'm still learning about my printers tolerances and how things fit together.

These files may change in the near future and feel free to modify and improve upon the design if you make one!

Motor:
https://www.hobbyking.com/en_us/hextronik-20g-brushless-outrunner-2300kv.html

ESC:
https://hobbyking.com/en_us/hobbykingr-tm-brushless-car-esc-10a-w-reverse.html

A generic 9 gram servo is used along with an 800 mah 2S lipo.

LulzBot

TAZ 6

Doesn't Matter

Yes

I used ABS for the print