4/19/24 Update: Adjusted the clearances on the dovetail joints so the parts fit together better.

________________________________________________________________________________________________________________

2-Pice wall hook sized for medium 3M Command Strips (Command Medium Refill Adhesive Strips, Damage Free Hanging Wall Adhesive Strips for Medium Indoor Wall Hooks). Hook is designed to cover the removal tab. To remove, simply slide the hook up from the base, exposing the Command Strip removal tab. Pull down on the Command Strip tab until the base comes off the wall.

The parts are also specifically designed to be printed without supports.

Depending on the quality of the print, you may need to trim the outer edge of the wedge on the Hook to get it to cleanly slide into the Base. (I have to trim them about 50% of the time. I could add some more clearance, but I like how tight the seams are when assembled.

I included a short and a long hook size. I designed the long hook specifically for baseball hats. I could design other Hook configurations. Just let me know what you need.

If you like the design, I would really appreciate your Makes and Likes!