With this mod you will be able to use any J-Head extruder with your BCN3D+ by BCN3D Technologies.

• you will need to fit the fan to your specific hotend, here some options: 1, 2, 3, 4, 5
• my hotend is 5mm longer (compared to the original BCNozzle) so the layer fan got too high. I lowered it by increasing the height of the layer fan holder: here you find the original one in case you have a different height.
• some M3x10 screws
• some M3 nuts

RepRap

BCN3D+

No

No

0.2mm

30%