I've tired of having to push the inset lock button on a Renault Duster trunk door. So I designed this button. It's inserted into the keyhole of the lock and can protrudes outside, making it much easier to push.

DISCLAIMER: I hold no responsibility of any damages caused to the car or trunk lock. It is possible that the tab inserted into the keyhole will break off and stuck within the lock. Also it is possible that the water will get through into the lock causing it to rust. USE AT YOUR OWN RISK.

(Said that, I didn't encounter any of those problems after using this button for almost 2 years.)

Version 3 includes an icon. Version 2 doesn't include. (Version 1 had weaker insertable tab so I won't even publish it.)

You may have to break off the excess length of the insertable tab.

Note that this will fit some cars but not others, because the lock size differs depending on the production year of your vehicle.
Here are dimensions I used (approx), check yours before printing:

• Lock/button diameter: 24.5mm
• Keyhole width: 3mm
• Keyhole height: 11mm

If your dimensions differ then you may want to edit the SCAD file accordingly.

Longer3D LK4

No

No

0.2

10%