The Clicky thingy is a clicker fidget where it's possible to change the clicker mechanism.

Different clicker mechanisms have different sound and feel. Some are quite loud, and ablit stiff, and others soft with a lower click sound.

I've also provided a fusion 360 file with sketches containing the exact dimemsions so you can create your own clicker mechanisms.

The body is a bit hard to take apart in the beginning, but gets easier after a few times.

Print in PLA at 0.3 mm layer height without any supports.
For the body, increase the infill to at least 50% and perimiters to 3.

The body should print in about 50 minutes and each clicker around 10 minutes.