Non-Printed Parts:

- 4x M5x30 SHCS's
- 4x M5 Nuts
- 1x M3x40 SHCS
- 1x M3x20 SHCS
- 2x M3 Nuts
- 1x AR-15 Buffer Detent Spring

Front Sight Assembly:

1 - Install Front Sight Frame on rail with 2x M5 nuts and bolts
2 - Insert AR-15 buffer detent spring into top cavity, followed by placing the Front Sight Post on top of it
3 - Place an M3 nut inside the Front Sight Adjustment Knob, with the nut facing down, and slide the knob into the side cavity of the frame
4 - Secure Front sight Post to Adjustment Knob with M3x20 SHCS
(5) - Adjust height as needed with knob for mechanical offset or bullet drop as-needed

Rear Sight Assembly:

1 - Install Rear Sight Frame on rail with 2x M5 nuts and bolts
2 - Place Front Sight Optic pillar in between posts on frame with text facing away from muzzle
3 - Screw in the Front Sight Adjustment Knob through the frame and optic (either side)
4 - Mate adjustment knob with Front Sight Knob Cap, adhere with M3x40 SHCS and M3 nut