ASMBL | Additive & Subtractive Manufacturing By Layer.

This is a massive step forward for 3D Printing. For full details read the ASMBL Blog on E3D's website |

The fantastic Fusion Plug-In is here | https://github.com/AndyEveritt/ASMBL

Read about ASMBL on the E3D Blog | https://e3d-online.com/blogs/news/asmbl

Print these parts in a carbon filled material. I suggest Luvocom 3F PET CF 9780 or ColorFabb's XT-CF20.

You will need:

1 x Motion System & ToolChanger.
1 x ToolChanger Blank Tool Plate & Dock Kit.
1 x CPAP Pipe.
1 x 39g - 1200kv CF2822 EMax Brushless Motor.
2 x 608ZZ Bearings.
1 x MR93ZZ Bearing.
1 x 55T (110mm) Closed Loop GT2 Belt.
1 x 16T GT2 Pulley 3mm Bore.
2 x 20T GT2 Pulley 8mm Bore.
1 x 2mm Single Flute Cutter.
1 x C8-ER8 100L Collet Chuck.
1 x EMAX 12a SimonK Brushless ESC.
7 x M3 10mm Buton Head Screws.
6 x M3 8mm Buton Head Screws.
4 x M3 5mm Buton Head Screws.
2 x Heatsink 22mm x 8mm.*

<hr/>

<b>WARNING!</b>
This is an experimental Tool. You will need to use safety glasses.

<hr/>

I have added asmbl.config.zip which contains the config for the ASMBL machine I have been developing on. It will likely be completley different to your machine. Use at your own risk!

<hr/>

Thingiverse is broken and I am unable to respond to messages. Please visit the E3D forum if you have any question or require assistance | https://forum.e3d-online.com/

<hr/>

For loads of different filaments, 3D printing parts, components and world-leading Hotends visit | e3d-online.com

For news, updates, and inside information, plus options to help support my work, visit http://ko-fi.com/gregthemaker

E3D's ToolChanger

No

No

0.2

12%