This is an accurate 1/16th scale model of a 1200x800 Euro Pallet.

It is printed in 4 pcs (2 identical) and snaps together. (with slightly more force then you feel like you should apply😁) 

It is best printed with a 0.25mm nozzle, and 0.1mm layer height, no support.
Brim is suggested if you have issues of print bed adhesion or warping on thin prints.

Test prints were done with:

Prusa Mk3S + Revo Six kit.
0.25mm Revo Nozzle
0.1mm layer height
Smooth PEI Bed
Generic Amazon PLA