Flopsy’s Easter Treasure Holder is a delightful 3D-printed creation that combines the charm of origami with practical functionality. Imagine an adorable bunny-shaped container, designed to hold precious Easter treasures. But here’s the twist: this little bunny features interchangeable faces! 🐰🌼

With a collection of different expressions—First Two faces on launch, made on Blender—Flopsy can adapt to any mood or occasion. Whether you want a smiling bunny to greet your guests or a winking one to add a touch of playfulness, simply swap out the faceplate. The details of the 3D print make it a delightful addition to any Easter celebration.

So, gather your 3D printer and create your own Flopsy’s Easter Treasure Holder. Fill it with tiny chocolate eggs, colorful beads, or other delightful surprises. Let Flopsy guard your Easter goodies with style and flair! 🥚✨

When 3D printing, follow these recommendations for optimal results:

Layer Height: Set the layer height to 0.2 mm. This value determines the thickness of each printed layer. Smaller layer heights result in finer details but longer print times.

First Layer Height: For the initial layer, use a height of 0.18 mm. A slightly thinner first layer ensures smoother surfaces.

Z Scale (Layer Height Adjustment):

• For large-size prints (100% scale), keep the Z scale at 0.80 mm or MAX 1.5 mm. This ensures you can fold the box, more layers more difficult to fold.
• However, if you’re scaling down the model (less than 70% scale), verify that the Z size remains at maximum of two layers. Adjust as needed to maintain proper layer adhesion.

Also you can use glue or silicone to stick the interchangeable faces!

Remember to calibrate your printer and perform test prints to fine-tune these settings based on your specific 3D printer and filament. Happy printing! 🖨🔧🌟

Feel free to explore the world of 3D printing and add a touch of magic to your Easter festivities! 🐣🎨

EDIT: Print the faces on high detail, that improve the connectors on the back and can match with Flopsy face!