print-in-place hinge design
Elise Ashley
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-03-15 20:01:40
1
0
000Beschreibung
Modellquelle
Rezensionen(0)
simple print-in-place hinge to add to other designs
It's so simple to print even I could do it, please post makes! :)
Print Settings
Printer:
Sovol SV01
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
Gyroid 15% (full size), 20% (half size H), 100% (half size V)
Filament:
Sovol PLAWhite
Notes:
Tested both at full (20 mm wide) and half size.
Both vertical and horizontal print tests successful.Sliced with Cura. For the vertical half size I chose an initial layer horizontal expansion of -0.1 mm because my printer over-extrudes slightly causing elephant foot. Chose Gyroid in-fill for better strength.
Original Tinkercad objects:
Modellquelle
Original-Link: Details anzeigen
CC-BY