A ‘Tiffany’ table lamp.
Dimensions:
200 X 200 mm base, 270 mm height of coloured sides, 2 mm thickness of coloured sides .
Layer 0.2 mm, 100% filling for the sides
0.2 mm layer, 25% filling for the remaining parts
PLA material
7 colours in print, 6 translucent and metal for edges
The base is printed with ‘Tigre’ by Filoalfa
The 4 parts have to be assembled on the base and have different holes for each of the 4 parts so it is impossible to mistake the assembly
Once assembled the edges should be glued with acrylic glue (Attack and similar) possibly with a small brush by running the brush with glue along the profiles and then trying to align the edges.
Gluing is quite easy because the 2 mm thickness ensures that the edges maintain a good elasticity, so it is easy to glue the 4 parts with the brush by progressively flexing the sides.

Please note:
The design of the 4 coloured parts has no tolerances, so it is made ‘only’ for multi-colour printing and not for the assembly of the individual parts

Materials required
No. 18 M3 X 12 mm Allen head screws
No. 14 M3 nuts
N. 1 ceramic E27 lampholder
Cable, socket and switch
7.8W 2700K LED lamp (E27)