Flsun SR - Dragon hotend effector mount
AmyCampbell
Mit KI Ähnliches finden
Druckprofil(0)
Modelldatei(0)
0
0
0
Veröffentlicht:2026-03-24 14:36:18
0
0
000Beschreibung
Modellquelle
Rezensionen(0)
Flsun SR dragon hotend mount (current version v1.2)
- Effector plate modification required !!! (expand hotend center hole to HS size, min. r11.2)
- Designed for M3 5.6mm brass insets
- For hotend holder use 4x M3 16mm screws
- Two resized fanducts, v1 works ok with 5015 fans ( 5015 fans mount https://www.thingiverse.com/thing:5029623)
Changelog:
v1.1
- Fixed holes spacing for cooling fans (compatible with: https://www.thingiverse.com/thing:5029623)
v1.2
- Fixed holes spacing for effector plate mount
Print Settings
Printer:
Flsun SR
Supports:
No
Resolution:
0.15
Infill:
25%
Filament:
Polymaker Polymax PETG
Notes:
Cura slicer settings
* 4-5 walls * 250C printing temp.(E3D volcano + Slicer eng. bi-metal heatbrake) * 80C initial layer build plate temp. * 68C build plate temp. * 40mm/s walls speed * 50mm/s infill speed * 6mm retraction (Capricorn PTFE) * 40mm/s retraction speed (E3D Hemera) * 15% fan speed * 5mm brimModellquelle
Original-Link: Details anzeigen
CC-BY