This is a filament painting of a racoon head.

It was made by using Midjourney, using the imagine of “a racoon head, vector, on a white background”.  The image was modified a bit to make the background transparent.  It was then put into HueForge and printed out.

Attached is the zip file with the HueForge Project.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Brown Transmission Distance: 0.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #5 at 0.48mm
Grey until layer #11 at 0.96mm
Brown until layer #18 at 1.52mm
White for the rest.