Before you print!
This is a special model, that is ment to be shot at, with an airsoft gun. It has many watertight compartments, so it can take multiple hits (depends on how strong gun you have).
Because its ment to be destroyed, I did not make it very detailed and
the hull is only 0,5mm thick - thus, the final print does not look the best, but it saves some filament.

Print settings:
Printed on PrusaMK3S. Layer height 0,2mm for all parts. Use colour change for desired colour!

Deck is ment to be held with 6 M3x12 wood screws, or just glue.

There are 2 “Turret” files. One with regular hole - you just put this one on the extrusion on the deck. Or, there is “With-Nut-Hole” option - You will need 4, M4 nuts and put them into the hole in the turret. I did this because the regular turrets would not sink.