A simple clip that snaps to a closet hanger to organize your favorite hats! There are multiple files to accommodate different hanger styles. And every style has a .stl with built in supports and without in case you want to use your own support settings. If printing .stls with built in supports .20 layer height is the best layer height to print at. 

Hanger Versions

-10mm (3/8in) for IKEA wood hangers (Pictured)

-8mm (5/16in) for plastic hangers

-2.5mm (3/32in) for wire hangers

-Flat hangers for Velvet lined Hangers

To remove supports you can either press apart with your finger nail or using a pair of needle nose pliers. Us a downward force from the top and try not to twist.