This is a filament painting of a lab puppy.

It was made by using Midjourney, using the imagine of “labrador puppy, sticker”.  The image was modified a bit to make the background transparent.  It was then put into HueForge and printed out.

Attached is the zip file with the HueForge Project.

Uses a 0.4mm nozzle.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Brown Transmission Distance: 2
PLA PolyLite Orange Transmission Distance: 14
PLA PolyLite Beige Transmission Distance: 3

Swap Instructions:
Black until layer #5 at 0.48mm
Brown until layer #8 at 0.72mm
Orange until layer #13 at 1.12mm
Beige for the rest.