This "bambu" printer prints with "AMS" because it is multicolor. The red cross mark and white base color on the cover are components, so even on the same plane, you can use the paint bucket tool for coloring, which is more standardized and neater than using the brush tool for coloring. Moreover, the number of layers in the multi-color part is relatively small, so the material is also relatively economical, and there will be no waste of replacing too many materials. As an AMS multi-color printing test, it is quite good. It is suitable for storing the daily medication of the elderly.

It is printed in three colors of PLA, green, white and red. The nozzle is 0.4mm, and the layer height is 0.2mm. Other printers please download the "STL" file, but there is no multi-color printing. The cover can be printed in three parts and glued together. The printed screws and nuts are not easy to use. I think they are too small to achieve the printing accuracy, and they are easy to break. Eight m3×30 steel hexagon socket screws and nuts can be used.