Summary

This system let's you mount your 5015 blowers on the top of the arms and save inertia on the effector plate

It's easy to install and you can chose between 2 configurations:

• One for the stock housing (or my lightweight version)
  https://www.thingiverse.com/thing:4938853
• One for the NSK Superfly extruder
  https://www.thingiverse.com/thing:5203540

You can also chose to mount the fans on the top of the arms or on the side

You'll need:

• the flexible tubing of this pump
  https://fr.aliexpress.com/item/1005001348833292.html
• 4 M3x14mm bolts

You can hotglue your 5015 fans in the fan mount, it works pefectly

Be sure to check the tube lenght, it shouldn't be pulled during the effector's movements