Pocket-size phone stand, customizable with 6 parameters, see image.

The .stl file was generated with the default parameters from the SCAD file:

• length: 90 mm
• height: 14 mm
• thickness: 4 mm
• opening: 10.5 mm
• open_angle: 45°
• phone_angle: 75°

Creality

Ender 3 Pro

No

No

.2

15%

You might need to slow down the printing of the peg, once the other parts are fully printed.

If it is too loose, you can glue the peg to the bottom part of the hinge.