MS Queen Elizabeth is a cruise ship of the Vista class operated by the Cunard Line. The design is modified from that of previous ships of that class, and slightly larger than Queen Victoria, at 92,000 GT, largely due to a more vertical stern. The ship is able to carry up to 2,092 passengers.

This model is also available on our cults3d profile.

This model is not 100% accurate and is designed to print at 1/300 scale but has not been printed at this scale so we cannot guarantee that it will print with no problems.

Please note that even though this model does print at 1/600 scale there are some imperfections to the finished prints.

The photos included are of the 1/600 scale model.

We would love to hear any feedback you have as this helps us provide a better service and don’t forget to share you prints and build photos with us, we love to see them.

If you experience any problems with the files or printing process please get in touch and we will endeavour to resolve any issues in a timely manner.

Email - iconic3dmodels@gmail.com / 3dprintoutz4u@gmail.com

Anycubic

All-metal Mega

No

Yes

20

these settings are based on 1/600 scale print

Filament used - PLA

Nozzle size - 0.4mm

layer height - 0.2mm

Print temperature - 180c

Print speed - 40mm/s

Layer settings - Top - 6 / Bottom - 6 / Wall - 4

infill - 10%

Supports - Manual placement of required supports is highly recommended.

• supports are not required but recommended for a better print result on Part 1.
• minimal supports are required on Parts 2,3 and 4.
• No supports are needed for Part 5.

Print time - Part 1 - 10-13 hours / Part 2 - 12-15 hours / Part 3 - 10-13 hours / Part 4 - 12-15 hours / Part 5 - 2-5 hours.

Filament required - 120 meters

difficulty rating - easy. the usual sanding down of parts will be required to ensure a good finish and to make sure parts glue together properly.

Model dimensions - Length - 480mm / Width - 60mm / Height - 103mm

Notes - scaling the model down any further then 100% may produce unpredictable printing results.

• Part 6 is a no support required alternative for printing the HULL STERN section.