Summary

This is a mount designed for use on my Surface Pro 4 and the Revopoint Pop 3D scanner. It is rather difficult holding the scanner and the tablet whilst concentrating on moving around the subject. This mount makes life a whole lot easier. Controlling the scanning software is so much more efficient with one hand spare.

I have uploaded a step file so this can be customised to other Surface Pro models or tablets.

Features are:

1.Universal M10 threaded mount (will fit a standard 3/8" camera mount snuggly).

2.Two types of handle.

3.Additional fixing holes for accessories like a LED light (will require a custom mounting plate).

4.Slots for plastic or Velcro cable ties to aid wire management.

BOM:

1.Ball head tripod mount with a 3\8" thread & adapter. I purchased this one:
https://www.amazon.co.uk/gp/product/B08SLNMC49/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

2.Various M3 hex bolts to fix the handle to the brace and any other accessories.

3.2 x M5 x 10 mm hex bolts

4.2 x M5 heat sets. I used these:
https://www.amazon.co.uk/gp/product/B07LBQFYCC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

5.1 x M5 x 30 mm threaded bar or equivalent M5 bolt with the head trimmed off.

6.20mm x 1mm self adhesive felt tape or the felt side of some Velcro tape to protect the device screen (I already have a tempered glass screen protector in place).

7.2 x M3 Heat Sets if using the Type 1 Handle.

Printing:

1.No parts require support.

2.Printed with 30% infill & 3 perimeters.

3.Printed with AMZ3D black PLA.

4.Part cooling required for best results with the M10 thread. Print along the Y axis to maximise cooling capabilities regards the M10 thread.

Update: 31\01\22 Uploaded a LED Light mounting plate which attaches via the top handle fixing holes. The LED light used here:
https://www.amazon.co.uk/gp/product/B07YSF3X8K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1