Summary

A table lamp shaped like a flying saucer with a beam of light that generates crop circle and abduction radius.
It is possible to make different bases (crop circles) according to one's taste.
By pressing the button on the back of the led torch (apex of the flying saucer) it is possible to switch the lamp on or off.
By pulling or pressing the lower part of the led torch it is possible to change the light beam.

Operates on batteries (3xAAA or 1x18650) with top-down lighting and adjustable light beam.

You can find the complete assortment, with all the parts and the various types of base (crop circles) on the web page: https://www.redpah.com/profile/16098/sergio-lanna.

ITALIANO
Una lampada da tavolo a forma di disco volante con fascio di luce che genera crop circle e raggio abduction.
E' possibile realizzare basi (crop circles) diverse a seconda del proprio gusto.
Premendo il tasto sul fondello della torcia led (apice del disco volante) è possibile accendere o spegnere la lampada.
Tirando o premendo la parte inferiore della torcia led è possibile cambiare il fascio luminoso.

Funziona a batterie (3xAAA oppure 1x18650) con accensione dall'alto e fascio di luce regolabile.

Puoi trovare l'assortimento completo, con tutte le parti e le varie tipologie di base (crop circles) sulla pagina web: https://www.redpah.com/profile/16098/sergio-lanna.

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Clone

Rafts:

Supports:

Resolution:

0.2

Filament: SUNLU PLA Various

Post-Printing

You must purchase the following items (Occorre acquistare i seguenti elementi):

Plexiglass tube 40x36mm diameter x 25cm long (Leroy Merlin € 13.00 for 1 meter)
Adjustable Led Torch (Chinese Store € 2.90)
4 bolts diameter 3 per 10mm in length with relative nuts
For Abduction: 10-15 cm fishing line and a human figurine

ITALIANO
Tubo plexiglass 40x36mm diametro x 20-25cm di lunghezza (Leroy Merlin € 13,00 da 1 metro)
Torcia Led a fascio regolabile (Negozio cinese € 2,90)
4 bulloncini diametro 3 per 10mmm di lunghezza con relativi dadi
Per Abduction: 10-15 cm lenza e una figurina umana

Items to buy separately (Elementi da acquistare a parte)

Plexiglas tube

Insert the LED torch in the lower part of the disc applying light pressure until the bottom touches

Apply the upper part of the disc by inserting the torch in the central hole and press until the ends of the lower and upper parts of the flying saucer touch

Here with the gray version of the upper part of the disk

Insert the nuts in the appropriate spaces in the lower part of the disc until they reach the bottom. Insert the bolts into the holes in the upper part of the disc, tighten and tighten well but do not overdo it.